I downloaded and installed your latest update for mac. I also putted the Vendor 1046 and Product 37777 into my preferences (actually I have the Satzuma and connection worked).
My problem is that the hardware is not moving. When I want to shoot I only get the sounds and no launch. I can’t move it either eventhough the arrows seem to work. I can hear a really tiny sound in the hardware just like if it was moving of one step but when I maintain an arrow, software crushes.
Could you please help me on that? Thank you Regards. DC Missile Launcher NZ (version 1 and version 2) are for the Dream Cheeky launchers. The software is available for download form the Dreamcheeky.com web site. >I’ve tried to get the video dialog off before it crashes, but the software freezes on launch and won’t let me click into the file menu.
The following command can be entered in the terminal to disable the camera function. It will not be one by default at application launch. Defaults write com.david.USBMissileLauncherNZ cameraDisabled -boolean YES – David. I’ve never had any luck in getting the control code sequences for the Satzuma. If I can physically get my hands on one, then it can be figured out. It has been a long time since I’ve done this so education via remove control would be somewhat of a challenge.
You can do this on a Mac (without a physical PC) but you would need Parallels/VMWare and a Windows XP or similar. Onto Windows you install the launcher software as you normally would – plug in the launcher and test Then you need the USBSnoop sourceforge project – download and install. Orcad 9.2 Full Version Free Download. – use this to trace what happens with the launcher (err bit of a pain to get going once you get it and see the output you understand). – the trick is to do only one or two distinct commands with the launcher – UP or DOWN, LEFT or RIGHT – this produces a hex dump and you need to figure out what’s changing and therefore what the hex codes are. – some launchers send a command followed by a STOP command, others can move and have to be repeatedly told to keep moving. Once you have some idea as to what’s going on it’s back to the Mac.
If you’re really keen and have xcode installed, I can send you the latest version of the source code (it might be the one that’s online – I don’t remember). There’s one file err missilecontrol.c (I’d have to check that name) and in there you will find the control logic for the different launchers. Satzuma will already be set up. The Satzuma logic will need to be changed to match what it actually needs for controls. – All this assumes they have not released a new version of the launcher and logic.
Find great deals on eBay for satzuma usb missile launcher and foldable keyboard. Shop with confidence. USB Missile Launcher. USB Missile Launcher. Product Code: ULIFE0. The USB Greatest Toy!!! Fs Racing Buggy Manual Transfer there. Feeling bored while working in the.
– And the other assumption – that the kext installation doesn’t stuff up parallels/vmware in terms of control over the launcher. If that message is fairly well understood and you’re still keen to engage. There could be a hero badge in your future! 🙂 OK, I’m off to sit in a movie theatre at midnight on the 12th of December.
Bring out the Hobbits! Begin the countdown from 100 minutes. Hey, is Jono doing something with this? I’ve bought Satzuma Usb missile launcher (gray) and i thought it’s the one with no support on your application?
At first i was not sure, i was thinking i had the “original one” but on my box there’s “satzuma”. Soo i assume i’m. 🙂 I got some errors. When i connect it, it says me to refer to console log because it is disconnected but if i wait a bit, i have my “missile launcher” locked. Then i unlock it, but it’s lagging and i can’t have the missile launcher moving. I only get the sound 🙂 Is there any way i can use the “USBSnoop sourceforge project” and try to do something into your application?
It would really be nice to have something working it’s for a gift. And i’m late. Haha 🙂 Thanks to you! Hello Pierre-Luc There isn’t a quick ending to this – might be a happy one – requires hard work. The current version of the software has partial support for the Satzuma – with absolutely no guarantee that it will work. The issue is that I have never been able to get my hands on one of these launchers and reverse engineer the missile command sequence.
Previous attempts for remote diagnostics have been unsuccessful. What’s needed? A PC or VMWare or Parallels running a windows OS 2. Debugging with USBSnoop c/- sourceforge to determine the launcher commands (HEX decoding – guesswork and some luck) 3. Applying the luck theory to the Mac side – one source file to change – largely done (subject to 2 above and what is discovered).
To do this you need the application source code (I can supply) and the latest version of XCode. There is a possibility that the KEXT file will also need changing and maybe/hopefully not. The key here is that you can decide that the command 0x04 should be sent to the launcher to make it turn left (for example). You can modify the code and test that straight away. Rince and repeat Where it can get a bit more involved is if the turn left command requires a STOP commend to be sent afterwards. And then the fire command can have it’s own challenges.
Hey, i just downloaded last release 1.8.1 (you updated it with Jono’s code?). Looks like Jono have a c-enter launcher missile? Soo in my preferences, i just choose c-enter in replacement of Satzuma, it’s same id’s.
At least, i got something working. Left and Right keys AND fire key! 😀 Up and down seems not to work, i did not tests buttons on the left.
After this awesome result, i did another try. I changed the setting for satzuma missile launcher. Then, i restarted the application but i got nothing working. Always lagging, only “beep” from the missile launcher. Soo, we are very close to something fully functional right? Hi David, Unfortunately, it does not fix the up/down problem.
I’ve tried restarting my old windows computer but it seems my motherboard is broken. I’ll get one at the job to help you with the HEX numbers you need for the up/down actions. By the way, i’ve also tried to put the original windows app into Wineskin, i had great hope in this but, it don’t seems to recognize when i plug the USB Missile Launcher into my computer. The app run, but don’t do nothing.
At least, i can say your app look’s better than the original 😉 Have a nice day. Hey, I’ve tried on another mac computer i have.
It’s working soo i thought i’ll clean data on my other computer and try it again 😉 I’ve tested Product and Vendor ID of Satzuma with OICStorm selected. It connects but nothing happen when i try to move it. I’ve also tried it with Satzuma, same result as before. The up and down keys did not complete their tasks. I only heard a little noise, like if it is trying to do something but cannot do anything. At last, i’ve tried with Vendor and Product ID of OICStorm, like i supposed it, it does not connect.
Thanks for your help, i hope we will achieve something 🙂. Search • Admin Controls • • • TrafficCamNZ update for iPhone X • TrafficCamNZ update for iPhone X • TrafficCamNZ Update v1.9.11 • TrafficCamNZ Update v1.9.11 • RT @: Lightning! Thanks to slo-mo video capture.
Was clearing out some old boxes when i found a old USB Missile Launcher that someone got me as a birthday gift years ago, lost the disk and the box it came in and cant seem to find a model number anyone on it, after letting windows update look for the drivers it just says its a Tenx Nonstandard Devic and i am. Was clearing out some old boxes when i found a old USB Missile Launcher that someone got me as a birthday gift years ago, lost the disk and the box it came in and cant seem to find a model number anyone on it, after letting windows update look for the drivers it just says its a Tenx Nonstandard Devic and i am unable to get any driver info like pci or vendor number because it says there are no drives installed? I was just hoping to get some sort of GUI that will allow my little boy to play with it on his laptop, (its running win7) any ideas? For the best answers, search on this site No,I don't think so. Ahmadinejad is the result of the axis of evil speech,before that Iran had a moderate president and was cooperating with the US some. Iran reacted to a hardline stance against them by electing a hardline conservative fundamentalist.
They expect Ahmadinejad to stand up to the US,but it is mostly sabre rattling from him,Israel and Bush. Iran will vote him out in 2009 if the world backs off a little,if not look for four more years of the little banty rooster.
Bombing Iran will solve nothing,you can't destroy knowledge. If Iran really is seeking nukes bombing will only delay them,which will leave the mess for future generations. Negotiation seems to be the only realistic course. • Tell us some more • Upload in Progress • Upload failed. Please upload a file larger than 100x100 pixels • We are experiencing some problems, please try again. • You can only upload files of type PNG, JPG, or JPEG.
• You can only upload files of type 3GP, 3GPP, MP4, MOV, AVI, MPG, MPEG, or RM. • You can only upload photos smaller than 5 MB.
• You can only upload videos smaller than 600MB. • You can only upload a photo (png, jpg, jpeg) or a video (3gp, 3gpp, mp4, mov, avi, mpg, mpeg, rm). • You can only upload a photo or a video.
• Video should be smaller than 600mb/5 minutes • Photo should be smaller than 5mb •.